Victron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply
- Estimated Delivery : Up to 4 business days
- Free Shipping & Returns : On all orders over $200
MPPT: Ultra Fast Maximum Power Point Tracking
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
Control Your Charger Remotely
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.
Remote Monitoring and Control
If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display control provides live-data, set-up and management, straight from the face of the device.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
CLICK HERE FOR SPEC SHEET
Brand
Victron Energy
Manufacturer Part Number
SCC125110412
GTIN
8719076055662
Battery Voltage
12 24 48V Auto Select (36V: manual)
Rated Charge Current
100A
Nominal PV Power, 12V
1450W
Nominal PV Power, 24V
2900W
Max. PV Short Circuit Current
70A
Maximum PV Open Circuit Voltage
250V absolute maximum coldest conditions | 245V start-up and operating maximum
Efficiency
99%
Charge Algorithm
multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm
Remote on-off
Yes (2 pole connector)
Data Communication Port
VE.Can, VE.Direct and Bluetooth
Protection Category
IP43
Dimensions
H216 x W295 x D103mm
Weight (kg)
4.5
Warranty
5 Years
Title
Default Title
Related products
-
-
-
-
-
Review Cart
Victron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply $213.85Select optionsVictron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply $213.85Select options
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
Control Your Charger Remotely
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.
Remote Monitoring and Control
If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display control provides live-data, set-up and management, straight from the face of the device.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
CLICK HERE FOR SPEC SHEET
Brand
Victron Energy
Manufacturer Part Number
SCC125110412
GTIN
8719076055662
Battery Voltage
12 24 48V Auto Select (36V: manual)
Rated Charge Current
100A
Nominal PV Power, 12V
1450W
Nominal PV Power, 24V
2900W
Max. PV Short Circuit Current
70A
Maximum PV Open Circuit Voltage
250V absolute maximum coldest conditions | 245V start-up and operating maximum
Efficiency
99%
Charge Algorithm
multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm
Remote on-off
Yes (2 pole connector)
Data Communication Port
VE.Can, VE.Direct and Bluetooth
Protection Category
IP43
Dimensions
H216 x W295 x D103mm
Weight (kg)
4.5
Warranty
5 Years
Title
Default Title
Related products
-
-
-
-
-
Review Cart
Victron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply $213.85Select optionsVictron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply $213.85Select options
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.
Remote Monitoring and Control
If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display control provides live-data, set-up and management, straight from the face of the device.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
CLICK HERE FOR SPEC SHEET
Brand
Victron Energy
Manufacturer Part Number
SCC125110412
GTIN
8719076055662
Battery Voltage
12 24 48V Auto Select (36V: manual)
Rated Charge Current
100A
Nominal PV Power, 12V
1450W
Nominal PV Power, 24V
2900W
Max. PV Short Circuit Current
70A
Maximum PV Open Circuit Voltage
250V absolute maximum coldest conditions | 245V start-up and operating maximum
Efficiency
99%
Charge Algorithm
multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm
Remote on-off
Yes (2 pole connector)
Data Communication Port
VE.Can, VE.Direct and Bluetooth
Protection Category
IP43
Dimensions
H216 x W295 x D103mm
Weight (kg)
4.5
Warranty
5 Years
Title
Default Title
Related products
-
-
-
-
-
Review Cart
Victron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply $213.85Select optionsVictron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply $213.85Select options
If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display control provides live-data, set-up and management, straight from the face of the device.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
CLICK HERE FOR SPEC SHEET
Brand
Victron Energy
Manufacturer Part Number
SCC125110412
GTIN
8719076055662
Battery Voltage
12 24 48V Auto Select (36V: manual)
Rated Charge Current
100A
Nominal PV Power, 12V
1450W
Nominal PV Power, 24V
2900W
Max. PV Short Circuit Current
70A
Maximum PV Open Circuit Voltage
250V absolute maximum coldest conditions | 245V start-up and operating maximum
Efficiency
99%
Charge Algorithm
multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm
Remote on-off
Yes (2 pole connector)
Data Communication Port
VE.Can, VE.Direct and Bluetooth
Protection Category
IP43
Dimensions
H216 x W295 x D103mm
Weight (kg)
4.5
Warranty
5 Years
Title
Default Title
Related products
-
-
-
-
-
Review Cart
Victron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply $213.85Select optionsVictron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply $213.85Select options
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display control provides live-data, set-up and management, straight from the face of the device.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
| Brand |
Victron Energy | ||
|---|---|---|---|
| Manufacturer Part Number |
SCC125110412 | ||
| GTIN |
8719076055662 | ||
| Battery Voltage |
12 24 48V Auto Select (36V: manual) | ||
| Rated Charge Current |
100A | ||
| Nominal PV Power, 12V |
1450W | ||
| Nominal PV Power, 24V |
2900W | ||
| Max. PV Short Circuit Current |
70A | ||
| Maximum PV Open Circuit Voltage |
250V absolute maximum coldest conditions | 245V start-up and operating maximum | ||
| Efficiency |
99% | ||
| Charge Algorithm |
multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | ||
| Remote on-off |
Yes (2 pole connector) | ||
| Data Communication Port |
VE.Can, VE.Direct and Bluetooth | ||
| Protection Category |
IP43 | ||
| Dimensions |
H216 x W295 x D103mm | ||
| Weight (kg) |
4.5 | ||
| Warranty |
5 Years | ||
| Title | Default Title |
|---|
Related products
Review Cart
Victron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 SupplyVictron Energy SmartSolar MPPT 250 100-Tr VE.Can – SCC125110412 Supply