Corner Piece (To Join Module to Top Centre Flashings) BLACK – ART101409 Supply
$2.85Part No: GSE-CORNER-BLA Mounting – In Roof Keywords: GSECORNERBLA, GSE, PV Mounting, In Roof Supplier Part No: ART101409 Weight:0.15 kg
FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 1–16 of 19 results
Part No: GSE-CORNER-BLA Mounting – In Roof Keywords: GSECORNERBLA, GSE, PV Mounting, In Roof Supplier Part No: ART101409 Weight:0.15 kg
Part No: DNLS10MB Mounting – Cable Flashings Don t risk roof leaks and system failure through cable damage by pushing unprotected cables under the tiles or slates. The MCS Installation Guide for PV requires that cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The use of…
Part No: GEN-SLATE Mounting – Roof Flashings SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally…
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-ENDCAP-RAIL-PLUG Mounting – Rail End Caps RAIL END CAPS Supplier Part No: ART101691
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-WEDGES-TWINPACK Mounting – In Roof Supplier Part No: GSE-WEDGES-TWINPACK Items in this pack: 4 Weight: 0.035 kg
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-CLAMP-SINGLE-H21-BLA Mounting – Module Clips Supplier Part No: ART100495 Weight: 0.028 kg
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-FLASHING-HOOK Mounting – In Roof Please note the the manufacturer is changing the design of this product. Functionality will remain the same so please don t be alarmed if the product you receive looks slightly different to the one pictured
Part No: GSE-FRAME-DPO-1650-1135 Mounting – In Roof GSE module mounting plate for one portrait PV module with length 1610-1800mm and width 1130-1135mm. 1610mm is the recommended length. Please note; These frames are ordered in halves. 2 frames are required per module – this product is simply showing the upper or lower half of a single frame….
Part No: GSE-FLASH-TOP-C-BLA Mounting – In Roof Keywords: GSEFLASHTOPCBLA, GSE, PV Mounting, In Roof Supplier Part No: ART101041 Weight: 1.4 kg Length: 1.5 m
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-RIVET Mounting – In Roof GSE pop rivet, fixing for top centre flashing. Made up of two key parts; the rivet body and the setting mandrel. The pop rivet is inserted into a pre-drilled hole in the materials you re joining together. Supplier Part No: ART100389 Weight:…
Part No: GSE-ROOFLEX-5M Mounting – In Roof This flexible sealing strip can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper flashing conponents. Easily malleable for various applications Pre bent to facilitate folding…
Part No: GSE-CLAMP-SINGLE-H16-V2023-BLA Mounting – Module Clips EPDM foam attached. Keywords: GSECLAMPSINGLEH16BLA, GSE, PV Mounting, Module Clip ART105897
Part No: GSE-JUNCTION-BLA Mounting – In Roof Supplier Part No: ART100039 Weight: 0.4 kg
Part No: GSE-FLASH-LAT-DPO-BLA Mounting – In Roof This black lateral flashing comprises the sides of the PV array. A continuous line of flashings should be installed on each side of the array and a 15cm overlap distance should be observed between pieces of flashing. Keywords: GSEFLASHLATBLA, GSE, PV Mounting, In Roof Note the new DPO…
Part No: GSE-CLAMP-DOUBLE-H16-V2023-BLA Mounting – Module Clips EPDM foam attached. GSE-CLAMP-DOUBLE-H16-V2023-BLA Supplier Part No: ART105904 Weight: 0.023 kg
Part No: GSE-SEAL Mounting – In Roof The precompressed seal is used to ensure a complete waterproof perimeter around the PV array. The seal is pressed on to the flashing pieces at the border with the roof tiles. Supplier Part No: ART101088 Weight: 0.45 kg
End of content
End of content
No products in the cart.